Digital conductivity sensor Memosens CLL47E

Length: 120 mm
Measuring range: 

• 5 µS/cm to 200mS/cm
• 0°C to 100°C 
• Ambient pressure

4-electrode-sensor with stainless steel, ceramic and platin for laboratory and sample measurement in the field with a wide measuring range. Connectable via inductive, digital connection with Memosens technology.

The digital conductivity sensor Memosens CLL47E is a four-electrode conductivity sensor with stainless steel, ceramic and platin is designed for laboratory and sample measurement in the field with a wide measuring range. 

Thanks to Memosens technology, the sensors provide reliable, highly accurate measurements with a fast response time. 

The inductive Memosens coupling between the corresponding Memosens sensor and the mobile CML18 handheld device is insensitive to moisture and corrosion.

The Memosens technology is based on a true plug-and-play principle. Just connect the sensor and you are ready to start your measurements. Measured values, calibration data and history are stored directly in the sensor. This means status values can be read out and a sensor check is also possible. An excellent feature to boost your GLP.

All sensors are supplied pre-calibrated. Thus, they are directly ready for use for your random sample measurement when the corresponding sensor is connected to the associated mobile handheld device Liquiline Mobile CML18.

Features:

• Wide measuring range thanks to 4-electrode-sensor technology: enables analysis of many different samples.
• Solid platinum electrodes – provide easy cleaning and a very long lifetime

Recommended cleaning agent:  
Distilled water, warm water with cleaning agent with surfactants (dishwasher) - Isopropanol, Ethanol – only cleaning, not storing